Orthopedic devices for penis enlargement have been used by men for over a decade and have proven to be successful. The most widely used device is called an extender, which translates from English as expander or filler. This fully reflects its purpose. It is characterized by simplicity of design and assembly, which allows men to use both a purchased (factory) and homemade extension cord. It's quite easy to do. The main thing is to have the necessary equipment and basic knowledge regarding the mechanics of the intimate device.
Types and effects of extensions
The device works on the principle of the proliferation of the corpora cavernosa. This occurs under conditions of regular tissue tension due to the periodic unwinding of the axes in the direction of increasing length. The growth of new tissue does not stop; cells divide under the constant influence of the distracting force.
Average growth rates, according to user and manufacturer reviews, correspond to an increase in length of 2 to 5 centimeters over a period of 6 to 10 months. You should not expect instant results. Patience and regular use of the extender will be required. Violation of this recommendation will lead to the inability to achieve the desired effect.
Depending on the method of attachment, extension cords are divided into several types. When planning to assemble a home version, you need to understand how they differ from each other.
Vacuum extension
The circumference is made using a special vacuum chamber. It covers the head of the penis with a circumference of approximately 3 to 7 centimeters. It is considered the most reliable and safe. The risk of injury is practically reduced to zero, since there is no risk of compression.
Extender for penis enlargement
Buckle and strap extension
The binding mechanics are almost the same, but the shape of the binding is different. In the first case, a buckle is used, and in the second, a strap. The difference gives these species a significant difference.
The strap is lined with gauze, so the degree of compression is minimal. The loop, on the contrary, can strongly compress the head, disrupting blood supply to the reproductive organ, but remains the most common option.
How to make an extension cord with your own hands at home?
You can make any of the three types of devices listed. The most difficult to manufacture will be the vacuum one because it will be necessary to create a chamber. Otherwise, the process will not show any significant difference.
Drawings
Make a schematic diagram of the device yourself. To make a drawing, it is enough to study the design of any well-known manufacturer. From a photograph, a drawing, a video, they sketch their outline. The length of the side uprights is chosen according to the desired result. This can vary from 20 to 25 centimeters.
Materials and tools required
A homemade extension cord at home is assembled from the same parts as the factory one. The specific materials depend on the type of structure to be assembled:
- The retaining ring, straps and buckles are in direct contact with the skin and should not cause an allergic reaction. This places certain demands on the material. The ring can be made from thick cardboard, plastic/hypoallergenic plastic without sharp corners. Its internal diameter should be 2 to 3 mm larger than the transverse width of the penis. It is best to use a sterile dressing before use, which is changed each time.
- The slats (side rods) are selected in such a way that they can fix the required length for a long time. These can be chrome dies, rods, spokes.
- The vacuum chamber and the bulb must be sealed. If this condition is not met, such a homemade product will not work.
The difference between the devices is in the fastening element. If you decide to make a variety with a camera, you should give preference not to a plastic bottle as is written in some sources, but to purchase a special jar. These are sold in pharmacies. This ensures the creation of an internal vacuum.
Schematic house extender
Step-by-step assembly instructions
Manufacturing a strap or buckle device involves performing the following sequence of work:
- A workpiece with a diameter of 11 cm is cut from a piece of plywood or other material with a thickness of no more than 10 mm. A hole with a circumference of at least 5. 5 cm is made inside. Other dimensions are determined by the cross section of. the penis.
- The length of the stems is 20 to 30 cm. They are screwed completely into the plywood, leaving a little on top. Entrance places are filled with glue.
- They screw a "lamb" on each.
- Strips are cut from a thin metal plate and holes are made in them.
- A clamp made of soft tubes or a strap, which can be used as a wide medical tourniquet, is inserted into the holes.
- Check the reliability of the fixation.
The assembly of the sous vide variety differs only in that a pot with a pear is attached to the end. Not everyone has such a device at home, but it is available over the counter in local pharmacies. The radius varies from 13 to 25 mm. It is chosen based on the size of the reproductive organ. The clamp is sealed by a rubber sleeve. Its length must be at least 6 cm. It can be made from elastic surgical gloves.
The air will be pumped using a bulb or a connector with a hose. You can use the tonometer item. The stopcock is unscrewed from it and inserted from the other end. This allows you to change the operating principle. The bulb will begin to pump rather than pump air. As you can see, you will have to tinker more than with a strap and buckle device.
To help you understand the principle of assembling an extension cord with your own hands at home, a video will help you, which clearly shows how the elements are connected, as well as what materials they are made of.
Extension for penis enlargement - attached below the knee
How and when to use it?
The indication for use of the device is the small size of the device (10-12 cm). This length is not a "reference" length. The man decides for himself whether he is satisfied with his reproductive organ or whether he wants to have more. To increase the size of the phallus, you need to wear a home-made or factory-made device for at least 4-6 hours a day. The design allows you to hide the extension under clothing. People around you won't notice anything.
Instructions for using the stretcher:
- The circle is placed on a slightly erect penis. The ring should fit snugly against the pubic bone.
- The foreskin is retracted and a camera, buckle or strap is attached to the glans. It is necessary to ensure that blood flow has not been disturbed (no excessive pressure, changes in color of the integument).
- Adjust the length of the rods. There should be no painful sensations. The parameter gradually increases, allowing the organ to get used to the degree of tension, that is, the phallus is trained.
When possible, massage the penis every hour. This allows it to quickly adapt to loads. After the allotted time, the device is removed and the flesh is kneaded using special intimate creams. The device is carefully disinfected each time and placed in clean packaging for storage.
Advantages and disadvantages of homemade structures
The advantages of a home stretcher include the following parameters:
- the possibility of trying the stretcher without purchasing a device;
- relative cheapness;
- obtain a design that fully corresponds to the parameters of the phallus.
There are actually very few benefits. There are more disadvantages. These include the disadvantages of the product, since it is quite difficult to independently assemble a model that, ideally, twists, puts on, takes off, does not press anywhere and does not slip.
Which extension cord is better - factory or homemade?
To answer this question, simply compare the two types of models:
- A homemade product weighs much more than factory models. This leads to the need to adjust the rods each time for a long time so that they do not compress the head of the penis. Another point is that it is quite difficult to make a vacuum model. By the way, it is generally less effective than homemade ones with a buckle and strap.
- Cost, which was cited as an advantage, is a relative advantage. Today there are Chinese models costing 1000-3000 rubles. It's no more expensive than a homemade extension cord. No one will sell half a meter of hairpins or 20 centimeters of textolite. You will have to purchase a lot more material that will go unused. This makes assembling the device with your own hands profitable only when you already have everything you need.
- The simplified design of a self-assembled device is not an advantage, but a disadvantage, since its use will be inconvenient. You have to spend a lot of time putting it on and taking it off, and taking into account the fact that self-massage is periodically recommended, it is also less effective.
A conclusion can be drawn: the factory device is better. To try this penis enlargement method, you can simply purchase an inexpensive model
What risks can there be when using a homemade device?
Experts and experts do not recommend assembling an extension cord yourself without the appropriate skills. If the device turns out to be "clumsy", presses, presses, causes discomfort, its use is strongly discouraged. This can lead to unpleasant consequences.
House extension
A properly assembled device will not be inferior in efficiency to the factory one. It will only be aesthetically unappealing. Otherwise there will be no difference, but there is also a nuance here. Many users write that with prolonged use, hematomas, compaction and irritation form on the dermis.
This may be due to poor quality materials. Finding medical silicone in pharmacies is almost impossible. If one is sold, its properties leave much to be desired, and with prolonged contact, negative consequences begin to appear.